Instructions

1. Working voltage 220v

2. Using the fashion stand, the nozzle is placed down on a flat surface

3. Insert the melt strip from the glue inlet and push it to the barrel (using Φ7mm-Φ7.5mm strip)

4. Turn on the power for 5 minutes or until the strip is completely melted.

5. Just tap the trigger to let the sol flow naturally. Excessive force may damage the glue gun.

6. After the work is finished, do not pull out the rubber strip from the rubber inlet. The hot melt adhesive will cause serious burns or damage to the glue gun.

Characteristics

1. Thermostat thermostat, ultra-fast sol (built-in PTC heater)

2. The gun body is sturdy and made of advanced engineering plastics.

3. Using high-tech electronic ceramic PTC, rapid temperature rise (peak reaches in 2 minutes), high-speed sol energy-efficient

4. Lead-free environmental protection, I am nuisance

5. The nozzle can adjust the flow size, and it is easy to eliminate the blockage of the gun nozzle.

6. The gun body and structure are light, aluminum-plastic integrated gun and heat insulation device, no glue and no glue, easy to operate

Precautions

1. Check whether the voltage is in accordance with the requirements before use, and whether it is in good contact with the power socket.

2. When used for the first time, the electric heating element will produce slight smoke, the second is normal imagination, it will disappear automatically after ten minutes.

3. After the power is turned on, the glue gun should not be in the standby state for a long time (not more than 20 minutes); when it is suspended, pull out the plug.

4. Avoid use in extremely high or low temperature environments

5. It is not advisable to do it under the cold wind, otherwise it will reduce the work efficiency and loss of electric energy.

6. Not suitable for bonding heavy goods or items that require strong adhesion

7. The quality of the strip will directly affect the function of the hot melt gun and the quality of the work piece.